Ключевые слова: FCL, HTS, YBCO, coated conductors, quench, recovery characteristics, resistance, heat transfer, modeling, experimental results
Ключевые слова: HTS, YBCO, MOCVD process, PLD process, comparison, coated conductors, CORC cables, winding configurations, design parameters, thickness dependence, width, former, geometry effects, critical caracteristics, critical current, n-value, current-voltage characteristics, mechanical properties, strain effects, experimental results
Ключевые слова: LTS, Nb3Sn, NbTi, coils, design parameters, magnets, experimental devices, neutron scattering, design, mechanical properties, stress distribution, magnetic field distribution
Ключевые слова: MgB2/Nb/Cu, wires, fabrication, in-situ process, sintering, PIT process, in-situ process, X-ray diffraction, microstructure, critical temperature, magnetization, temperature dependence, irreversibility fields, magnetization curves, critical caracteristics, Jc/B curves, experimental results
Yang J., Chen X., Shi Y., Chen W., Zhang X., Yang X., Coombs T., Shen B., Liu H., Ni Z., Sheng J., Zeng L., Guo L., Tian M., Fu L., Ozturk Y., Xie Q.
Ключевые слова: MRI magnets, HTS, coated conductors, tapes, coils pancake, quench protection, hot spots, modeling, current distribution
Shen B., Chen X., Fu L., Jiang S., Gou H., Sheng J., Huang Z., Wang W., Zhai Y., Yuan Y., Gao S., Wang S., Li C., Chen W., Mu S., Zhou Q., Song W.*10, Pei X., Ozturk Y., Gawith J., Liu Y., Patel I., Tian M., Yang J., Coombs T.
Ключевые слова: CORC cables, design parameters, cores, HTS, current density, distribution, ac losses, twisting, modeling, numerical analysis
Ключевые слова: HTS, Bi2212, wires round, ac losses, defects, local distribution, uniformity, modeling, numerical analysis
Ключевые слова: HTS, REBCO, coated conductors, joints, joint resistances, contact characteristics, resistivity, interfaces, X-ray tomography, experimental results
Ключевые слова: HTS, YBCO, coated conductors, stacked blocks, ac losses, measurement technique, calorimetric method, sensors
Ключевые слова: ITER, coils, jacket, defects, welding, control systems, acoustic emission, eddy currents, crack formation, experimental results
Wang S., Jiang H., Chen W., Chen P., Zhu J., Guo T., Zhang K., Liu J., Ding K., Lu K., Dong Y., Du Q., Wei D.
Ключевые слова: power equipment, FCL resistive, FCL three-phase, HTS, YBCO, tapes, fault currents, quench current, resistance, high voltage process, recovery characteristics, test results
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.